北京资质代办公司排名长春seo排名扣费

Kubernetes概述
使用kubeadm快速部署一个k8s集群
Kubernetes高可用集群二进制部署（一）主机准备和负载均衡器安装
Kubernetes高可用集群二进制部署（二）ETCD集群部署
Kubernetes高可用集群二进制部署（三）部署api-server
Kubernetes高可用集群二进制部署（四）部署kubectl和kube-controller-manager、kube-scheduler
Kubernetes高可用集群二进制部署（五）kubelet、kube-proxy、Calico、CoreDNS
Kubernetes高可用集群二进制部署（六）Kubernetes集群节点添加

1. Kubernetes软件包下载

在master1下载k8s的安装包

[root@k8s-master1 k8s-work]# wget https://dl.k8s.io/v1.21.10/kubernetes-server-linux-amd64.tar.gz

网络不好可以多试几次，或者本地下载好上传到服务器上

2. Kubernetes软件包安装

tar -xvf kubernetes-server-linux-amd64.tar.gzcd kubernetes/server/bin/cp kube-apiserver kube-controller-manager kube-scheduler kubectl /usr/local/bin/

3. Kubernetes软件分发

scp kube-apiserver kube-controller-manager kube-scheduler kubectl k8s-master2:/usr/local/bin/
scp kube-apiserver kube-controller-manager kube-scheduler kubectl k8s-master3:/usr/local/bin/

在工作节点上分发软件，因为只规划了一台服务器作为工作节点(k8s-worker1)，实际在工作中为了节省资源会把master同时作为工作节点

scp kubelet kube-proxy k8s-master1:/usr/local/bin
scp kubelet kube-proxy k8s-master2:/usr/local/bin
scp kubelet kube-proxy k8s-master3:/usr/local/bin
scp kubelet kube-proxy k8s-worker1:/usr/local/bin

如果在工作中主备服务器（控制平面）不需要作为工作节点（数据平面）使用，那么就不需要拷贝kubelet kube-proxy

4. 在集群节点上创建目录

所有节点（除了负载均衡器之外），也就是三台master + worker1

mkdir -p /etc/kubernetes/     
mkdir -p /etc/kubernetes/ssl    #存放集群所使用的证书 
mkdir -p /var/log/kubernetes    #当前节点组件的日志

5. 部署api-server

5.1 创建apiserver证书请求文件

在master1上执行

cd /data/k8s-workcat > kube-apiserver-csr.json << "EOF"
{
"CN": "kubernetes","hosts": ["127.0.0.1","192.168.10.103","192.168.10.104","192.168.10.105","192.168.10.106","192.168.10.107", #为了后期可以往集群添加节点，冗余几个ip"192.168.10.108","192.168.10.109","192.168.10.110","192.168.10.111","192.168.10.100", #负载均衡器中的虚拟ip"10.96.0.1", #k8s集群service网段的第一个ip"kubernetes","kubernetes.default","kubernetes.default.svc","kubernetes.default.svc.cluster","kubernetes.default.svc.cluster.local"],"key": {"algo": "rsa", #加密算法"size": 2048},"names": [{"C": "CN","ST": "Beijing","L": "Beijing","O": "kubemsb","OU": "CN"}]
}
EOF

说明：
如果 hosts 字段不为空则需要指定授权使用该证书的 IP（含VIP） 或域名列表。由于该证书被 集群使用，需要将节点的IP都填上，为了方便后期扩容可以多写几个预留的IP。
同时还需要填写 service 网络的首个IP(一般是 kube-apiserver 指定的 service-cluster-ip-range 网段的第一个IP，如 10.96.0.1)。

5.2 生成apiserver证书及token文件

cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-apiserver-csr.json | cfssljson -bare kube-apiserver

cat > token.csv << EOF
$(head -c 16 /dev/urandom | od -An -t x | tr -d ' '),kubelet-bootstrap,10001,"system:kubelet-bootstrap"
EOF

说明：
创建TLS机制所需TOKEN
TLS Bootstraping：Master apiserver启用TLS认证后，Node节点kubelet和kube-proxy与kube-apiserver进行通信，必须使用CA签发的有效证书才可以，当Node节点很多时，这种客户端证书颁发需要大量工作，同样也会增加集群扩展复杂度。为了简化流程，Kubernetes引入了TLS bootstraping机制来自动颁发客户端证书，kubelet会以一个低权限用户自动向apiserver申请证书，kubelet的证书由apiserver动态签署。所以强烈建议在Node上使用这种方式，目前主要用于kubelet，kube-proxy还是由我们统一颁发一个证书。

5.3 创建apiserver服务配置文件

cat > /etc/kubernetes/kube-apiserver.conf << "EOF"
KUBE_APISERVER_OPTS="--enable-admission-plugins=NamespaceLifecycle,NodeRestriction,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota \--anonymous-auth=false \--bind-address=192.168.10.103 \ #当前主机master1的ip--secure-port=6443 \ #安全端口，与haproxy中的配置文件端口对应的6443是一致的--advertise-address=192.168.10.103 \--insecure-port=0 \--authorization-mode=Node,RBAC \--runtime-config=api/all=true \--enable-bootstrap-token-auth \--service-cluster-ip-range=10.96.0.0/16 \--token-auth-file=/etc/kubernetes/token.csv \ #上一步创建的token文件位置--service-node-port-range=30000-32767 \--tls-cert-file=/etc/kubernetes/ssl/kube-apiserver.pem  \--tls-private-key-file=/etc/kubernetes/ssl/kube-apiserver-key.pem \ #kube-apiserver私钥文件--client-ca-file=/etc/kubernetes/ssl/ca.pem \ #客户端ca证书--kubelet-client-certificate=/etc/kubernetes/ssl/kube-apiserver.pem \--kubelet-client-key=/etc/kubernetes/ssl/kube-apiserver-key.pem \--service-account-key-file=/etc/kubernetes/ssl/ca-key.pem \--service-account-signing-key-file=/etc/kubernetes/ssl/ca-key.pem  \--service-account-issuer=api \--etcd-cafile=/etc/etcd/ssl/ca.pem \--etcd-certfile=/etc/etcd/ssl/etcd.pem \--etcd-keyfile=/etc/etcd/ssl/etcd-key.pem \--etcd-servers=https://192.168.10.103:2379,https://192.168.10.104:2379,https://192.168.10.105:2379 \ #etcd集群地址--enable-swagger-ui=true \--allow-privileged=true \--apiserver-count=3 \--audit-log-maxage=30 \--audit-log-maxbackup=3 \--audit-log-maxsize=100 \--audit-log-path=/var/log/kube-apiserver-audit.log \--event-ttl=1h \--alsologtostderr=true \--logtostderr=false \--log-dir=/var/log/kubernetes \--v=4"
EOF

cd /etc/kubernetes

5.4 创建apiserver服务管理配置文件

cat > /etc/systemd/system/kube-apiserver.service << "EOF"
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes
After=etcd.service
Wants=etcd.service[Service]
EnvironmentFile=-/etc/kubernetes/kube-apiserver.conf
ExecStart=/usr/local/bin/kube-apiserver $KUBE_APISERVER_OPTS
Restart=on-failure
RestartSec=5
Type=notify
LimitNOFILE=65536[Install]
WantedBy=multi-user.target
EOF

5.5 同步文件到集群master节点

[root@k8s-master1 k8s-work]# cd /data/k8s-work/
cp ca*.pem /etc/kubernetes/ssl/

cp kube-apiserver*.pem /etc/kubernetes/ssl/

cp token.csv /etc/kubernetes/

scp /etc/kubernetes/token.csv k8s-master2:/etc/kubernetes
scp /etc/kubernetes/token.csv k8s-master3:/etc/kubernetes

scp /etc/kubernetes/ssl/kube-apiserver*.pem k8s-master2:/etc/kubernetes/ssl
scp /etc/kubernetes/ssl/kube-apiserver*.pem k8s-master3:/etc/kubernetes/ssl

scp /etc/kubernetes/ssl/ca*.pem k8s-master2:/etc/kubernetes/ssl
scp /etc/kubernetes/ssl/ca*.pem k8s-master3:/etc/kubernetes/ssl

scp /etc/kubernetes/kube-apiserver.conf k8s-master2:/etc/kubernetes/kube-apiserver.conf

在master2上修改配置文件

vim /etc/kubernetes/kube-apiserver.conf

# cat /etc/kubernetes/kube-apiserver.conf
KUBE_APISERVER_OPTS="--enable-admission-plugins=NamespaceLifecycle,NodeRestriction,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota \--anonymous-auth=false \--bind-address=192.168.10.104 \ #修改ip--secure-port=6443 \--advertise-address=192.168.10.104 \ #修改ip--insecure-port=0 \--authorization-mode=Node,RBAC \--runtime-config=api/all=true \--enable-bootstrap-token-auth \--service-cluster-ip-range=10.96.0.0/16 \--token-auth-file=/etc/kubernetes/token.csv \--service-node-port-range=30000-32767 \--tls-cert-file=/etc/kubernetes/ssl/kube-apiserver.pem  \--tls-private-key-file=/etc/kubernetes/ssl/kube-apiserver-key.pem \--client-ca-file=/etc/kubernetes/ssl/ca.pem \--kubelet-client-certificate=/etc/kubernetes/ssl/kube-apiserver.pem \--kubelet-client-key=/etc/kubernetes/ssl/kube-apiserver-key.pem \--service-account-key-file=/etc/kubernetes/ssl/ca-key.pem \--service-account-signing-key-file=/etc/kubernetes/ssl/ca-key.pem  \--service-account-issuer=api \--etcd-cafile=/etc/etcd/ssl/ca.pem \--etcd-certfile=/etc/etcd/ssl/etcd.pem \--etcd-keyfile=/etc/etcd/ssl/etcd-key.pem \--etcd-servers=https://192.168.10.12:2379,https://192.168.10.13:2379,https://192.168.10.14:2379 \--enable-swagger-ui=true \--allow-privileged=true \--apiserver-count=3 \--audit-log-maxage=30 \--audit-log-maxbackup=3 \--audit-log-maxsize=100 \--audit-log-path=/var/log/kube-apiserver-audit.log \--event-ttl=1h \--alsologtostderr=true \--logtostderr=false \--log-dir=/var/log/kubernetes \--v=4"

scp /etc/kubernetes/kube-apiserver.conf k8s-master3:/etc/kubernetes/kube-apiserver.conf

在master3上修改配置文件

vim /etc/kubernetes/kube-apiserver.conf

# cat /etc/kubernetes/kube-apiserver.conf
KUBE_APISERVER_OPTS="--enable-admission-plugins=NamespaceLifecycle,NodeRestriction,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota \--anonymous-auth=false \--bind-address=192.168.10.105 \--secure-port=6443 \--advertise-address=192.168.10.105 \--insecure-port=0 \--authorization-mode=Node,RBAC \--runtime-config=api/all=true \--enable-bootstrap-token-auth \--service-cluster-ip-range=10.96.0.0/16 \--token-auth-file=/etc/kubernetes/token.csv \--service-node-port-range=30000-32767 \--tls-cert-file=/etc/kubernetes/ssl/kube-apiserver.pem  \--tls-private-key-file=/etc/kubernetes/ssl/kube-apiserver-key.pem \--client-ca-file=/etc/kubernetes/ssl/ca.pem \--kubelet-client-certificate=/etc/kubernetes/ssl/kube-apiserver.pem \--kubelet-client-key=/etc/kubernetes/ssl/kube-apiserver-key.pem \--service-account-key-file=/etc/kubernetes/ssl/ca-key.pem \--service-account-signing-key-file=/etc/kubernetes/ssl/ca-key.pem  \--service-account-issuer=api \--etcd-cafile=/etc/etcd/ssl/ca.pem \--etcd-certfile=/etc/etcd/ssl/etcd.pem \--etcd-keyfile=/etc/etcd/ssl/etcd-key.pem \--etcd-servers=https://192.168.10.12:2379,https://192.168.10.13:2379,https://192.168.10.14:2379 \--enable-swagger-ui=true \--allow-privileged=true \--apiserver-count=3 \--audit-log-maxage=30 \--audit-log-maxbackup=3 \--audit-log-maxsize=100 \--audit-log-path=/var/log/kube-apiserver-audit.log \--event-ttl=1h \--alsologtostderr=true \--logtostderr=false \--log-dir=/var/log/kubernetes \--v=4"

分发服务管理文件

scp /etc/systemd/system/kube-apiserver.service k8s-master2:/etc/systemd/system/kube-apiserver.servicescp /etc/systemd/system/kube-apiserver.service k8s-master3:/etc/systemd/system/kube-apiserver.service

5.6 启动apiserver服务

三个主节点都要执行

systemctl daemon-reload
systemctl enable --now kube-apiserversystemctl status kube-apiserver# 测试
curl --insecure https://192.168.10.103:6443/
curl --insecure https://192.168.10.104:6443/
curl --insecure https://192.168.10.105:6443/
curl --insecure https://192.168.10.100:6443/ #虚拟ip

因为在当前命令行验证是没有经过认证的 所以会提示401，但可以证明服务正常启动