当前位置：首页 > news >正文

响应式网站用什么做培训心得模板

news 2025/7/15 9:37:47

响应式网站用什么做,培训心得模板,游戏app开发,wordpress 转小程序华为PPPOE配置实验网络拓扑图拓扑说明电信ISP设备配置用户拨号路由器配置查看是否拨上号是否看不懂？ 看不懂就对了，只是记录一下命令。至于所有原理，等想写了再写网络拓扑图拓扑说明用户路由器用于模拟家用拨号路由器，该设备…

华为PPPOE配置实验

网络拓扑图
- 拓扑说明
- 电信ISP设备配置
- 用户拨号路由器配置
- 查看是否拨上号
- 是否看不懂？看不懂就对了，只是记录一下命令。至于所有原理，等想写了再写

网络拓扑图

在这里插入图片描述

拓扑说明

用户路由器用于模拟家用拨号路由器，该设备为pppoe的客户端
电信ISP设备则模拟电信的网络设备，该设备为pppoe的服务端
而中间交换机则用于模拟光猫；光猫为桥接模式，此处不做任何配置，当场傻瓜式设备使用

电信ISP设备配置

<Huawei>system-view 		# 进入系统视图
[Huawei]sysname ISP			# 配置路由器名字
[ISP]aaa
[ISP-aaa]local-user huawei password cipher huawei
[ISP-aaa]local-user huawei service-type ppp
[ISP-aaa]quit
[ISP]ip pool pppoe
[ISP-ip-pool-pppoe]network 100.64.254.0 mask 24
[ISP-ip-pool-pppoe]gateway-list 100.64.254.1
[ISP-ip-pool-pppoe]dns-list 114.114.114.114 223.5.5.5
[ISP-ip-pool-pppoe]quit
[ISP]interface Virtual-Template 1
[ISP-Virtual-Template1]ip address 100.64.254.1 24
[ISP-Virtual-Template1]remote address pool pppoe
[ISP-Virtual-Template1]ppp authentication-mode chap
[ISP]interface GigabitEthernet 0/0/0
[ISP-GigabitEthernet0/0/0]pppoe-server bind virtual-template 1

用户拨号路由器配置

dialer-ruledialer-rule 1 ip permit
interface Dialer1link-protocol pppppp chap user huaweippp chap password cipher %$%$gu>xPdzPz>"FWUHp:EdW,"%o%$%$ppp pap local-user huawei password cipher %$%$0VL)HZ/u8~H>]sNN#yiY,"K\%$%$ip address ppp-negotiatedialer user HUAWEIdialer bundle 1dialer-group 1nat outbound 3000
acl number 3000  rule 100 permit ip 
interface GigabitEthernet0/0/0pppoe-client dial-bundle-number 1

查看是否拨上号

[jiucai]display ip interface brief  
Interface                         IP Address/Mask      Physical   Protocol  
Dialer1                           100.64.254.254/32    up         up(s)     
GigabitEthernet0/0/0              unassigned           up         down      [jiucai]ping 100.64.254.1PING 100.64.254.1: 56  data bytes, press CTRL_C to breakReply from 100.64.254.1: bytes=56 Sequence=1 ttl=255 time=80 msReply from 100.64.254.1: bytes=56 Sequence=2 ttl=255 time=50 msReply from 100.64.254.1: bytes=56 Sequence=3 ttl=255 time=20 msReply from 100.64.254.1: bytes=56 Sequence=4 ttl=255 time=30 ms--- 100.64.254.1 ping statistics ---4 packet(s) transmitted4 packet(s) received0.00% packet lossround-trip min/avg/max = 20/45/80 ms    [jiucai]display dialer interface Dialer 1
Dial Interface:Dialer1Dialer Timers(Secs):Auto-dial:300    Compete:20    Enable:5Idle:120    Wait-for-Carrier:60[jiucai]display interface Dialer 1
Dialer1 current state : UP
Line protocol current state : UP (spoofing)
Description:HUAWEI, AR Series, Dialer1 Interface
Route Port,The Maximum Transmit Unit is 1500, Hold timer is 10(sec)
Internet Address is negotiated, 100.64.254.254/32
Link layer protocol is PPP
LCP initial
Physical is Dialer
Current system time: 2023-08-18 14:48:11-08:00Last 300 seconds input rate 0 bits/sec, 0 packets/secLast 300 seconds output rate 0 bits/sec, 0 packets/secRealtime 0 seconds input rate 0 bits/sec, 0 packets/secRealtime 0 seconds output rate 0 bits/sec, 0 packets/secInput: 0 bytesOutput:0 bytesInput bandwidth utilization  :    0%Output bandwidth utilization :    0%
Bound to Dialer1:0:
Dialer1:0 current state : UP ,
Line protocol current state : UPLink layer protocol is PPP
LCP opened, IPCP opened
Packets statistics:Input packets:0,  0 bytesOutput packets:4, 336 bytesFCS error packets:0Address error packets:0Control field control error packets:0